BEP
Main Battery Switch |
Main battery switch |
Main battery switch and battery selector
by BEP Marine
 |
 |
This switch could be recessed through varying thicknesses of panels. The
Easyfit-switch achieves through an easily removable threaded ring allowing for
panel thicknesses up to 19mm (3/4“0). Supplied with a removable rear cover.
Specifications: On/Off - Operation
Continuous rating 275 amps DC
Intermittent rating 455 Amps DC
Cranking Amps 1250 Amps DC for 10 seconds
Voltage rating up to 48 Volts DC
| BEP Easyfit Battery Switch |
Main battery switch
Contour lock system, allows to be mounted as a stand alone unit, or
locked
together with other switches. Supplied with a removable rear cover.
The switch
can be either surface or recess mounted by cutting a 2 1/16“ (52mm)
hole.
Specification: On/Off - Operation
Continuous Duty Rating 275 Amps
Intermittent Duty Rating 455 Amps
Maximum Intermittent Duty Rating 1250 Amps for 10 seconds
Voltage rating 48 Volts DC
Dimensions 69mm x 69mm x 75mm high
| BEP Main battery switch standard |
Heavy Duty Battery Switch
Can be recessed or surface mounted. Switch can be locked using 6mm
padlock
with 75mm reach.
Specifications: On/Off - Operation
Continuous rating 550 Amps
Intermittent rating 700 Amps
Cranking rating 2500 Amps for 10 seconds
Voltage rating 48 Volts DC
| BEP Heavy Duty Battery Switch |
Mini Battery Selector Switch
Contour lock system, allows to be mounted as a stand alone unit, or locked
together with other switches. Supplied with a removable rear cover. The switch
can be either surface or recess mounted by cutting a 2 1/16“ (52mm) hole.
Specification: 1-2-both-off - Operation
Continuous rating 200 amps
Intermittent rating 300 amps
Cranking rating 1000 amps for 10 seconds
Voltage rating 48 volts DC
Dimensions 69 x 69 x 75 mm high
| BEP Mini Battery Selector Switch |
Battery Selector Switch
Can be recessed or surface mounted. Switch can be locked using 6mm
padlock
with 75mm reach.
Specifications: 1-2-both-off - Operation
Continuous rating between common and B1 or B2: 350 Amps
Continuous rating between common and B1+B2: 500 Amps
Intermittent rating 500 Amps
Cranking rating 1500 Amps for 10 seconds
Voltage rating 48 Volts DC
Dimensions 102mm x 102mm x 90mm high
| BEP Battery Selector Switch |
 |
 |
300 Amp Electric Remote Battery Switch
The Electric Battery Switch fills a need on larger boats where cable
runs are
becoming excessive and as a result voltage drop is a concern. The switch
is
placed as close as possible to the batteries, and a short run of cable
from the
start batteries to the starter motor. The Electric Battery Switch contains
latching
relays to reduce the current consumption. easily operated by a (on)
off (on) momentary switch. This can be remotely switched from any convenient
position in
the boat utilising the remote switch.
Continuous rating 300 Amps
Intermittent rating 400 Amps
Cranking rating 1250 Amps for 10 seconds
Voltage rating 12 or 24 Volts DC
Operation On/Off
Dimensions 102mm x 102mm x 107 mm high
Remote Switching
Dimensions: 68H
X 68W X 36D
| BEP Electric Battery Switch
with remote switch |
All prices including german VAT plus shipping.
Philippi battery main switches
Philippi power distibution panels ST100 and STV200 series
Kontakt:
Busse Yachtshop
Burkamp 6
24220 Flintbek bei Kiel
Tel: 04347 9082 34
Fax: 04347 9082 35