IC-M603

Large LCD with dot-matrix characters
The large full dot-matrix display is designed for optimum readability in any lighting condition. With the extra large font, the channel number is maximized on the display and upper and lower case characters can be easily read.

Superior receiver performance
The IC-M603 has excellent receive specifications which allow a weak signal a better chance of being heard when louder signals are around it. The powerful audio output from the front facing large speaker further increases the audibility and quality of received calls.

30 Watt 2-way hailer capability
When connected to an external hailer horn, communication with other boats, deck or dock hands is easy. The built-in 30W amplifier increases your talk power making your message loud and clear. Four fog horn patterns are available for the automatic fog
horn, adding further to the safety of the ship.

Submersible construction
The IC-M603, including the supplied microphone, withstands submersion in up to 1m depth of water for 30 minutes. It is equivalent to IPX7 waterproofing.

Built-in ITU Class-D DSC
 No matter what channel you’re tuned to, a separate and independent receiver inside
the IC-M603 continuously monitors Ch. 70. The 10-keypad allows simple and efficient operation of the DSC emergency functions, vital for your safety at sea.

Position request and position report
Over and above the DSC, your own and other ships’ position data can be exchanged with the position request or position report functions. The received position information can be transferred to external GPS or navigation equipment. In addition, the polling (request/ reply) function checks whether a specific ship is within the communications range.

RX speaker function
The RX speaker function, “receiver-repeater”allows you to monitor the received radio
audio from a hailer horn on the deck or tower. You can also make an announcement onboard from the microphone.

Favorite channel function
This function allows quicker channel selection. Set the “TAG” channel to the channels used most often. When pushing the up/down buttons on the speaker microphone, only tagged channels are selected and untagged channels are skipped. In addition, the “TAG” scanning function detects only tagged channels.

 Features
• Dual/tri-watch function for monitoring Ch.16 and/or call channel
• 7 levels adjustable backlit display and keypad
• Optional voice scrambler, UT-112 for private communication
• 70 programmable channels • Low voltage indicator
• AquaQuake draining function emits a vibrating sound and clears water away from the speaker grill

Technical data: 
Frequency range: Tx 156,000–161,450 MHz
                            Rx 156,000–163,425 MHz
                            Ch. 70 Rx 156,525 MHz
Usable channels : INT and USA channels
Power supply requirement: 13,8 V DC (10,8–15,6 V DC)
Current drain (bei 13,8 V): Transmit 5,5 A (bei 25 W HF) Receive 1,5 A (max. audio)
Operating temperature range : –20 °C bis +60 °C
Antenna impedance : 50 Ohm (SO-239)
Dimensions : 220 × 110 × 109,4 mm (B × H × T; ohne vorstehende Teile)
Weight (ca.) : 1400 g
GPS-Interface: Eingang RMC, GGA, GNS, GLL, VTG
                       Ausgang DSC, DSE

More information in the manual (1MB pdf).

shipping with: 
IC-M603 VHF MARINE TRANSCEIVER wit integrated DSC Controller, Hand microphone, DC power cable, Mounting bracket kit, manual

ICOM IC-M603 VHF marine transceiver

order here

Accessories: 

HM-162 Commandmic 3 Hand-UKW-remote control for IC-M505 LCD-Display, 2,8 W Audio Output power, all functions, incl. DSC are available, incl. 1,50m cable and 6m extension cable • waterproof  IPX8 (1,5 m/30 min)  • user-friendly designed  • Class-D-DSC-functions to use from mic  • Large LCD Display • Large Speaker, diameter 45 mm • ext. speaker adapter • the remote controll may be positioned up to 18m away from the IC-M505

ICOM HM-162 Commandmic 3 for IC-M603 with 1,5m spiral cable and 6m cable to transceiver	order here
MB-75 Panel-installation kit for IC-M603	order here

All prices incl. 19% VAT excl. shipping.

Zurück