Impeller pumps

A capacity of 14 to 55 l/min allow the adaption of the pump to its application area. All engines are designed for heavy duty operation and have a long life time even when they are extensively used.

Do not use, solvents, thinners, highly concentrated or organic acids. It can be operated with diesel fuel.Also the pump should not run dry for more than 30 seconds. 

All pumps are self-priming and available as 12V or 24V versions.
 

	F2P10-19	F3B-19	F4B-19	F5B-19
Pump body	Termoplastic	Bronze	Bronze	Bronze
Connection for  vacuum switch	no	yes	yes	yes
Impeller	1077B-9  Nitril	1052S-9 Nitril	824P-9 Nitril	1027B-9 Nitril
Hose connection	D 1/2" / 13mm	3/8" BSP	1/2" BSP	3/4" BSP
Dimensions LxWxH	172x117x78mm	170x100x82mm	202x120x90mm	258x131x120mm
Weight	1,6 kg	2,0 kg	3,0 kg	8,0 kg
Data sheet pdf	245 kB	607 kB	230 kB	279 kB
	order here	order here	order here	order here

complies with the following CE specifications:
F2P10-19, F3B-19, F4B-19 :
   EN50082-1: 1992/Generic EMS Standard
   EN55014: 1993/Radio disturbance
   IEC801-2: 1984/Electrostatic Discharge
   IEC801-3: 1984/Radiated Immunity Test
   ISO8846: Small Craft – Electrical devices – Protection against ignition of surrounding
   flammable gases
   ISO8849: Small Craft – Electrically operated bilge pumps
   ISO10133: Small Craft – Electrical systems – Extra-low voltage d.c.installations
F5B-19 12/24 V :
   EN55014: 1993/Radio disturbance

Accessories:

	Vacuum switch Switches off the pump, when the bilge/tank is dry. Data sheet 172 kB 189,00 €
	Deck wash kit For F4B-19 pump consists of:  pressure switch, check valve and trigger nozzle Data sheet 87 kB 76,00 €

back